How To Beat Your Boss Electric Fireplace Wall Hanging
Electric Fireplace Wall Hanging Ideas
In contrast to traditional wood or gas fireplaces Wall-mount electric fireplaces are ready to be installed straight out of the box. They're a great way to add ambience without venting or remodeling.
They are usually heavy and require careful installation. Follow these steps to hang your new electric fireplace in the correct way.
1. Connect the Brackets
A wall-mounted or recessed fireplace instantly improves the look of any room. This is a great option for those who don't have fireplaces or live in apartments.
Choose where you'd like to put your electric fire. It is important to choose an area that isn't susceptible to moisture and is at least just a few inches from furniture, drapes, and areas that are prone to traffic. Once you've found a spot, mark the wall with markings for the top and bottom plates of the fireplace frame.
Make use of a drill or another tool to drill exploratory holes into the wall. Find studs using an stud-detector. Then, mark the drywall according to the location of the fireplace mounting brackets. Then, patch and paint the drywall, or make the wall a bit bigger to prepare it for fireplace installation.
Depending on the fireplace mounted to the wall you choose, you may need to install both the firebox and screen as one piece or separate them using a wall bracket. If you're not sure of your abilities to manage this task on your own, you might consider hiring a general contractor or experienced carpenter.
You can find templates included with the majority of electric fireplaces. However it is recommended to keep a pencil level handy and a pencil to mark the exact spot where the wall brackets will be placed. Before drilling, use the template to check that the fireplace's power cable is able to reach from the place of installation to an outlet nearby to plug it in.
Once the studs and fireplace frame are in place, you can put in the drywall as seamless and flush as is possible for a clean appearance. Add trim to the bottom edge, and then sand, paint and finish the frame.
Most wall-mounted electric fireplaces have hooks or slots on the back of the unit, which you can insert into the slots or hooks on the mounting brackets. Make sure that the slots or hooks are properly aligned prior to connecting the fire to wall brackets. Once the fire is installed you can then add additional elements such as driftwood logs, crystal embers or decorative rocks.
2. Check the Bottom Bracket
The space above a fire, mantel or chimney breast is prime real estate for hanging artwork. There is a delicate balance between an artistic arrangement and one that does not detract from the overall design of the fireplace.
A common rule is that a photograph should not exceed 80% of the length of the fireplace or mantel it is placed over. This will help keep it in proportion and make it look good on the wall. Other ornaments & decorative items placed on the mantel can affect the size and proportional guidelines.
If you intend to hang a photo above your electric fireplace the frame should be made of glass or another material that can handle high temperatures. If you're not sure, you can test the frame with a heat sensitive cloth to see if it is suitable for this type of installation.
The risk of damaging artwork due to smoke or hot stray heat is a typical issue when displaying artwork on the fireplace. While this is not a huge issue with a traditional wood or gas-powered fireplace, it's a good idea to check the recommendations of the manufacturer if you're planning to install a wall-mounted electric fire.
The majority of electrical fires have mounting brackets that can be attached to the wall with hanging screws or wall-mounted fixing systems. If the latter is the case, it is recommended to make exploratory holes in a distinct area of the wall before you begin to install your electric fire. Afterwards you can use an instrument to locate cables and pipes to verify that there aren't any pipes or cables near your chosen mounting position.
If so, you could place your fire on the electrical socket or move it to a different place. If you decide to move it to a new spot you'll need to make sure that the power cable will be able to connect from the fire to the electrical socket. this is especially important for older homes or houses with solid walls. If you don't do this, your electric fireplace won't work properly. Certain models come with a template that indicates the locations to drill holes for this purpose Some require a spirit level & pencil to mark the correct places on your wall.
3. Connect the Power Cord
You may need to move your plug socket to the back of the fireplace if you've installed a recessed fireplace. This will give it a more sleek look. Test the fireplace first to make sure it is operating correctly.
A third popular way to mount an electric fireplace is to frame it and build it into the wall. This creates a polished traditional look and also allows you to build a mantel. The owner's guide for your model will provide specifics regarding framing, wiring and securing the fire place.
The location of your new electric fireplace on the wall with a marker or pencil. Then apply a carpenter's level to ensure that the installation location is level and flat. You can use a studfinder mark the location so you know you are drilling in a secure area.
Once you've marked the location of the installation then use your electric drill to create holes for the bracket screws or hanging screws. Follow the steps in your owner's guide for this step. This is particularly important if you're putting the fireplace in drywall. If you're unsure of what to do, you can ask a professional for help.
You can also hide power cords from view using an organizer kit for cables. These kits usually include clips, sleeves, or boxes for bundling cables. You can also use fish tape or wire snake tools to help guide the cables through the wall. If you'd rather not cut into your wall then you can put in an electric bridge kit to make more secure and safe connections.
fireplacesandstoves can also camouflage cords using paintable wire covers or by adhering them to the wall. Keep the cover or tacks far enough away from heat sources. This will avoid accidental contact and will protect the cord.
4. Connect the adapter
A wall-mounted electric fire place is an excellent option for home renovations or those without the space or money to put in gas fireplaces. They are easy to hang and ready to use straight out of the box. They're a great alternative for those looking for a stylish, modern touch or warmth from a fireplace. They can be hung on any wall as artwork, and they're electric with fan-powered heating.
Before you begin the actual installation process it's a good idea to take stock of all the tools and equipment you'll require. Check the user manual for specific instructions about how to install your electric fire. Some models will require you to fix the brackets directly onto the wall while others might have a mounting plate that slides into slots or hooks attached to the mounting brackets. If you are installing a recessed model, it's important to ensure that all combustible materials are removed from the area of installation. In general it is recommended to keep these materials at a minimum of 3 feet from the front of the fireplace.
After you've checked all components, you'll need to plug in your electric fireplace and make sure that it is working correctly. This is an essential step, as it will ensure that the flame effect screen and heater operate as intended. This will give you a clear idea of the final product in its final position.
Cover the cord after you are satisfied that it's functioning properly. This will keep the final product neat and tidy. You can achieve this by installing a new outlet using the cord that is tucked behind the unit. This will give your fireplace a seamless finish.